Moen Adler
87233SRS · Spot Resist Stainless
Single handle, integrated pull-down sprayer
92.0SpecFit Score / 100
Check Price on Amazon
Moen Adler vs. Delta Foundations (Kitchen Faucets)
This comparison looks at the Moen Adler 87233SRS pull-down faucet in Spot Resist Stainless and the Delta Foundations B4410LF faucet in Chrome, focusing on sink compatibility, spray setup, working space and documented construction features.
Delta Foundations
B4410LF · Chrome
Single handle, separate side sprayer
80.7SpecFit Score / 100
Check Price on Amazon
As Amazon Associates, we earn from qualifying purchases. Links on this page may earn us a commission at no extra cost to you. Read more.
Decision summary
Conditional specification-based edge: Moen Adler
Moen has the stronger all-around feature set, provided it fits your sink.
Its integrated pull-down wand, choice of one-hole or three-hole mounting, and higher spout give it the default advantage. The Delta is a sensible alternative for a compatible four-hole sink, especially if you prefer a conventional spout with a separate side spray and longer forward reach.
11.3Moen's score lead, points
ModerateRecommendation confidence
100%Common verified coverage of scored criteria
100%Ranking stability in 8 weight tests
Main reason for Moen: the integrated sprayer and more flexible mounting arrangement. Main reason for Delta: an existing four-hole, eight-inch centerset sink can make the Delta the more straightforward fit, regardless of its lower default score.
Check your sink before comparing scores. Moen's specified installation uses one or three holes. Delta's specified installation uses four holes. A faucet that does not match the available holes and deck thickness is not a direct installation choice without modifying the setup. The scores do not override this requirement.
Quick decision table
| Decision area | Moen Adler | Delta Foundations | Edge |
|---|---|---|---|
| Sink-hole fit | One or three mounting holes | Four mounting holes at 8-inch centers | Depends on sink |
| Spray arrangement | Pull-down wand in main spout | Separate side sprayer | Moen for integrated spray |
| Faucet height | 14 9/16 inches overall | 8 3/8 inches overall | Depends on clearance |
| Spout reach | 7 1/2 inches | 9 1/2 inches | Delta for longer reach |
| Documented flow | 1.5 gpm at 60 psi | 1.8 gpm at 60 psi | Depends on water-use priority |
| Residential warranty | Limited lifetime | Limited lifetime | Tie |
Why Moen scores higher
Spray configuration matters most in the default model. Moen puts the movable spray head directly in the spout and provides stream and rinse settings without a separate spray fixture. Delta has a genuine side sprayer, but it requires a different arrangement at the sink.
Mounting choice contributes another substantial difference. Moen documents both one-hole and three-hole installations and a maximum deck thickness of 2 1/2 inches. Delta specifies four holes and a maximum deck thickness of 1 3/8 inches. These are clear adaptability advantages, but not a promise of compatibility with every existing sink.
Working space is a smaller, mixed advantage. Moen has a taller body and higher outlet clearance; Delta extends farther over the sink. Both publish limited lifetime residential warranties and relevant plumbing compliance, so those shared attributes do not drive the score gap.
1. Sink fit and installation
Hole configuration is a requirement, not a feature that other strengths can make up for.
| Specification | Moen 87233SRS | Delta B4410LF | Practical meaning |
|---|---|---|---|
| Mounting layout | One-hole or three-hole; deckplate included | Four-hole, 8-inch centerset | Check your actual hole count and spacing before choosing. |
| Deck thickness limit | 2 1/2 inches | 1 3/8 inches | Moen allows a thicker mounting surface, assuming other installation requirements are met. |
| Hole size | 1 1/2-inch minimum diameter | Approximately 1 5/16 to 1 1/2 inches per mounting hole | Confirm hole diameters as well as hole count. |
| Supply connection | 3/8-inch compression | 1/2-inch, 14 NPSM threaded male inlets | The documented connections are different; verify the needed supply connections. |
| Connection and valve design | Duralock quick-connect; 1255 Duralast cartridge | Washerless rotating ball valve with replaceable seats | Both publish serviceable components, but these designs are not directly comparable reliability measurements. |
For a new one-hole sink, Moen is the documented direct fit. For an existing four-hole sink arranged for a side spray, Delta's installation may be a more natural match. A mounting plate does not make the Moen a documented four-hole faucet.
Decision: Compatibility comes first. On general mounting flexibility, Moen has the edge.
2. Sprayer configuration and control
Both faucets provide a moving spray option, but they place it in different parts of the sink setup.
| Specification | Moen 87233SRS | Delta B4410LF | Practical meaning |
|---|---|---|---|
| Movable sprayer | Integrated pull-down spray wand | Separate sink-mounted side sprayer | Moen keeps spray and regular flow in one fixture; Delta reserves a separate location for spraying. |
| Water outlet options | Aerated stream and powerful rinse at the wand | Standard spout stream plus separate side spray | Both offer two ways to direct water. The arrangement differs more than the basic purpose. |
| Hose and return | 68-inch braided hose; Reflex retraction and docking system | Side spray included; directly comparable hose length not verified for this finish and variant | Total hose length and usable extension are not the same measurement. Hose length is not scored. |
| Documented extra | Power Clean spray technology | Spout swivels 360 degrees | Neither manufacturer statement is direct, comparable proof of better real-world washing results. |
Moen's integrated, retracting wand suits a preference for a single main fixture. Delta remains useful if a dedicated side sprayer is wanted. No independent side-by-side spray-pressure or cleaning test is included in this specification score.
Default spec edge: Moen for integrated spray operation.
3. Sink working space and water delivery
Height, reach, overhead clearance and water flow help establish whether a faucet fits how the sink is used.
| Specification | Moen 87233SRS | Delta B4410LF | Practical meaning |
|---|---|---|---|
| Overall height | 14 9/16 inches | 8 3/8 inches | Moen needs more room above the counter, including below a window ledge or shelf. |
| Outlet height in technical drawing | 8 5/16 inches | 6 5/8 inches | More outlet clearance may help with taller items; the movable sprayers add other reach options. |
| Spout forward reach | 7 1/2 inches | 9 1/2 inches | Delta's fixed spout extends 2 inches farther, which may matter on a wide basin. |
| Rated flow at 60 psi | 1.5 gallons per minute | 1.8 gallons per minute | Delta has a higher rated rate; whether that is preferable depends on the task and desired water use. Not scored. |
| Spout rotation | Rotation angle not verified in cited model sheet | 360 degrees | Delta's full swivel range is explicitly documented. Moen is not scored as lacking rotation. |
The larger Moen is not automatically better for every sink. It gives greater height but requires more overhead room, while the shorter Delta offers more fixed-spout reach. The published flow figures are tested at the same supply pressure, but flow alone cannot predict ease of rinsing or splashing.
Decision: Mixed. Moen for vertical clearance, Delta for fixed-spout reach and lower overall height.
4. Warranty, standards and service information
Documented warranty terms and compliance help establish baseline support, but not a guarantee of future reliability.
| Specification | Moen 87233SRS | Delta B4410LF | Practical meaning |
|---|---|---|---|
| Original residential purchaser | Limited lifetime warranty | Limited lifetime warranty | Both have broadly similar stated residential warranty duration; full terms and exclusions apply. |
| Commercial use | Five-year limited warranty; ten years for multifamily | Five-year limited warranty for other commercial uses; ten years for multifamily | Coverage depends on installation type and purchaser status. |
| Plumbing standards | ASME A112.18.1 / CSA B125.1; NSF 61 and 372 | ASME A112.18.1 / CSA B125.1; NSF/ANSI/CAN 61 and 372 | Both publish relevant plumbing and drinking-water compliance. |
| Accessible lever control | ADA lever-handle compliance documented | ADA control compliance documented | Neither receives extra credit over the other for a comparable documented capability. |
| Repair documentation | Cartridge and individual parts identified by Moen | Top-serviceable operating parts identified by Delta | Parts documentation supports servicing, not a measured lifespan comparison. |
There is no verified basis here to declare one faucet more durable or less likely to leak. The warranty and compliance dimension is treated as an effective tie.
Decision: Tie on the scored warranty and compliance criteria.
Which should you choose?
Choose Moen Adler if...
- Your sink or planned counter supports its specified one-hole or three-hole mounting.
- You prefer the spray head to pull down from the main spout.
- You have room for a 14 9/16-inch faucet and want higher outlet clearance.
- Your deck is thicker than Delta's published 1 3/8-inch limit but within Moen's stated limit.
Choose Delta Foundations if...
- Your sink has a compatible four-hole, eight-inch centerset arrangement.
- You specifically want a separate side sprayer.
- You need the shorter 8 3/8-inch overall height under an obstruction.
- You prefer the longer 9 1/2-inch reach of its standard spout.
What could change the decision?
The Moen stays ahead in all eight tested scenarios that raise or lower each main scoring weight by 20 percent and renormalize the others. This describes only the tested preference changes, not the likelihood that one product is better in practice.
The larger change is a must-have fit condition: a fixed four-hole installation can favor the Delta, while a one-hole installation supports the Moen. Restricted overhead clearance, preferred sprayer placement and the shape of the sink can also make the Delta more suitable, even though the default weighted score favors Moen.
Adjust your priorities
Move the sliders to change the relative weight of the four scored dimensions. The weights normalize to 100 percent and the scores update without changing a single product specification. Sink-hole compatibility remains a separate requirement.
Moen: 92.0 / 100Delta: 80.7 / 100Moen has the higher default specification score.
This tool changes assumed priorities only. The underlying verified attributes, mandatory mounting fit and original editorial verdict remain unchanged. No settings are saved or transmitted.
How we calculated the scores
| Scoring factor | Weight |
|---|---|
| Sprayer configuration and control | 35% |
| Mounting flexibility | 25% |
| Sink working geometry | 25% |
| Warranty and compliance | 15% |
| Total | 100% |
These are editorial weights for a general kitchen-faucet comparison, not industry standards. Each dimension combines related, verified criteria using practical usefulness rather than counting how many rows one product wins. Benefits flatten when a feature is already sufficient; raw flow rate, unverified hose comparisons and subjective long-term reliability are not awarded speculative points. All weighted criteria are supported for both faucets, so the score uses 100 percent common verified coverage without a missing-data adjustment. The result is a decision aid, not a promise of product quality or performance.
What the specifications cannot tell you
The cited measurements cannot establish actual leak frequency, finish wear, ease of installation for a specific plumbing setup, user comfort, or long-term sprayer performance. The manufacturers' descriptions of their spray systems are not controlled side-by-side cleaning tests. Check the existing mounting holes, deck thickness, nearby obstructions and supply connections before deciding.
Sources
- Moen Adler 87233 product page. Model configuration, finish and integrated sprayer details.
- Moen Adler 87233 technical specification sheet. Installation, dimensions, flow, cartridge, standards and warranty.
- Delta Foundations B4410LF product page. Chrome configuration, side spray, flow, valve and installation details.
- Delta B4410LF technical specification sheet. Dimensions, clearances, connections, compliance and warranty.
- Moen Adler illustrated parts list. Model suffix confirmation and documented replacement parts.